Optional Remote Controlled Valet Mode Entry And Exit; Remote Keyless Entry In Valet Mode; How To Interpret The Led Status Indicator; Autotesting - Clifford Arrow II Owner's Manual

Optional remote controlled valet mode entry and exit

You can even remotely enable or exit valet mode if you have an optional Clifford
4-button/12-channel ACG remote control. All you need to do is transmit channel 5
(one press of the side LevelShift button, then button 1). In addition to the previously
noted indications, two parking light flashes will confirm that you have remotely
enabled valet mode, while a single flash confirms exiting of valet mode.
Keyless entry in valet mode
Even in valet mode, you can still remotely convenience features. Press button 1 as if
you were disarming and the doors will unlock* (indicated by one parking light flash)
and the interior light will turn on*. Press button 1 again and the doors lock* (confirmed
by two flashes). Button 2 can activate an option such as a remote trunk release.

How to interpret the LED status indicator

The LED on your car's dashboard or console will inform you of the system status:
LED Condition
Off
On Valet mode is on, the vehicle can be driven or serviced without the remote control
Flashing

AutoTesting™

Each time you remotely arm your Arrow II, it automatically tests all system triggers
and sensors. If the hood, trunk or a door is open when you remotely arm, the
system will immediately alert you of the problem by sounding 4 chirps and 4
parking light flashes instead of the usual 2 and 2 (simply disarm, shut the hood,
door or trunk and re-arm to reactivate monitoring of that trigger point). Please note
that the door ajar warning will not work on vehicles with delayed courtesy lights.
NOTE: Since this is a warning indication, you will hear the 4 chirps even if you
"silently" arm with channel 3.

Automatic malfunction bypass

To provide protection even if a component malfunctions, the system automatically
bypasses any faulty point and arms all other triggers and sensors until you can have
the system serviced by your local Authorized Clifford Dealer.

Prior intrusion attempt alert

If you hear three chirps when you remotely disarm, it means that a trigger or sensor
was activated in your absence.
Meaning
System is disarmed and in normal operating mode (i.e., valet mode is off)
System is armed and protecting your vehicle
8
* Some vehicle require optional relays.