Clifford Arrow II Owner's Manual page 4

Standard Features of the Arrow II
Remote Door Lock/Unlock Capability
dark or bad weather! A press of a button on the remote control simultaneously
arms your system and locks your vehicle's power locks. Another press disarms
and unlocks (some vehicles require optional relays).
Enhanced User-Selectable AutoArming™
"passively" if you forget. May qualify you for an insurance discount that could
pay for the system (consult your insurance company).
AutoArming Enable/Disable
just a few flicks of a switch.
AutoArm & Lock™ — You may set the system to automatically lock the doors
every time the system AutoArms.
Visual Indication — Two parking lights flashes signal that the 30-second
countdown to AutoArming has started.
Instant AutoArm Bypass
bypass AutoArming for one cycle — perfect when fueling the vehicle.
AutoArming is automatically restored the next time you park your vehicle.
— An all-electronic, solid-state vibration/impact sensor that
Piezo Sensor™
delivers the utmost reliability and provides more accurate discrimination between
genuine intrusion attempts and non-threatening conditions (like a large truck
passing by) that cause other sensors to false alarm.
Advanced CMOS Microcomputer
microprocessor commands and monitors all system functions, yet it draws less
power than the vehicle's clock, so it won't deplete your car battery like other alarms.
AutoTesting™ — Tests all triggers and sensors every time you arm and warns you
if you accidentally arm the system with the door, hood or trunk open. If there is a
genuine trigger or sensor malfunction, the system will alert you whether the
problem is a trigger or sensor.
Patented Malfunction AutoBypass™
sensor malfunction, your Arrow II will automatically bypass the malfunction and
arm all other points to continue relentless protection of your vehicle.
— Arrow II's memory stores the identity of the last trigger or
TotalRecall™
sensor activated. This provides an invaluable diagnostic means, since, whenever
you wish, the system will visually identify the last activated trigger or sensor.
— No more fumbling with keys in the
— Automatically arms itself
— You may disable or re-enable AutoArming with
— Just two quick turns of the ignition switch will
—Very large scale integration (VLSI)
—In the unlikely event of a trigger or
3
(cont.)