Wacom CINTIQ 21UX Installation Manual & Hardware Manual page 31

Cintiq21UX_Manual.fm Page 29 Friday, January 28, 2005 6:49 PM
Hints:
• If the rotation lock screws are attached to the back of Cintiq, they must be removed before
Cintiq can be rotated.
• Before rotating the display unit, be sure the cable is freely rotating behind the unit.
• Because the Cintiq drawing surface will be a little higher than your desk, consider adjusting the
height of your desk or chair to assure comfortable use of the device.
• Maintain a good posture at all times, and change your position if you feel any discomfort due to
your work position.
• Do not pull the cable out of its computer connections by accidentally moving the pen display
tablet too far from the computer.
Note: Cintiq can also be mounted to articulated arms or other third-party stands meeting the VESA
100 specification for monitor stands. See Using an alternate mount or stand on page 54 for details.
Next Step: If you have not already done so, learn about the basics of customizing the Grip Pen.
See Customizing on page 30.
Working with your Cintiq
Page 29