Wacom CINTIQ 21UX Installation Manual & Hardware Manual page 13

Cintiq21UX_Manual.fm Page 11 Friday, January 28, 2005 6:49 PM
Adjusting rotation
The interactive pen display can be rotated on the display stand when the incline is less than or equal to
25 degrees.
To adjust rotation, grasp Cintiq by the main body and rotate the unit to the desired position; it will move
on the bearing hub. You can only rotate the display unit 180 degrees in either direction. If you do not
plan to rotate the Cintiq, use the rotation lock screws to fasten the display to the stand in a horizontal
position. See Optional display configurations on page 53 for more information.
Attaching the pen holder
The removable pen holder can be attached to the back of the pen display tablet by snapping it into
place in the cutout located at the upper rear center of the unit.
Note: The pen holder must be removed when routing the cable to exit through the top cable
opening.
Next Steps: Go to page 13 and familiarize yourself with the interactive pen display.
Unpacking your Cintiq
Page 11