Wacom CINTIQ 21UX Installation Manual & Hardware Manual page 22

Cintiq21UX_Manual.fm Page 20 Friday, January 28, 2005 6:49 PM
• If you are using analog (VGA) mode, you may want to fine-tune the display. Please refer to
Adjusting frequency and tracking (VGA only) on page 37, and to Adjusting the LCD monitor
beginning on page 34 for more information.
For Windows: If you are using Cintiq as a secondary display, you may first need to enable Cintiq in
your Display Properties control panel.
• After the LCD monitor portion of Cintiq is working to your satisfaction, move on to the next section
( Step 2: Pen tablet installation ) to install the pen tablet portion of Cintiq.
For troubleshooting tips, please refer to page 39.
Notes:
Each Cintiq LCD panel is produced under very stringent quality standards. Production techniques
cannot guarantee an absolutely perfect TFT display, and some panels may exhibit a certain number
of pixels that show an incorrect color. Refer to the specifications on page 58 for more information.
If an image has fine striping (such as screen stripes), it may appear to flicker or display a moiré
pattern.
Do not apply excessive pressure on the display surface, it may cause the appearance of a moiré or
pooling pattern. If you notice this action, use less pressure on the display screen when working
with the pen.
When a still image is displayed for a long period of time, an after-image may remain for a short time.
To prevent this, Wacom recommends using a screen saver or other power management feature.
Installation
Page 20