Table of Contents
Advertisement
ments are listed in the following table, along with spaces to write
in any optional sensors or switches that you have had installed.
ZONE
(Number of
LED Flashes)
1
2
3
5
NOTE: The LED does not report when the warn-away response has been
activated; it only reports triggered sequences.
The receiver and transmitter use mathematical formulas called
algorithms to change their codes each time the transmitter is used.
This Stealth Coding
the security of the unit. By following this set code sequence, the
receiver and transmitter stay synchronized, even if the transmitter
is used out of range of the vehicle. If, however, the transmitter is
pressed many times out of range, or the battery is removed, the
transmitter may get temporarily out of sync and fail to operate the
system. To resynchronize the transmitter, simply press
2004 Directed Electronics, Inc.
©
DESCRIPTION
Instant trigger for optional sensor,
hood or trunk pins
A heavier impact detected by
the on-board impact sensor
Door switch trigger
Ignition trigger
Stealth Coding
Technology
™
Technology has been developed to increase
DEALER-INSTALLED
OPTIONS
™
13
Advertisement
Table of Contents
