Remote-Controlled Valet; Nuisance Prevention Circuitry - Clifford 22CX User Manual

State-of-the-art vehicle security system

Hide thumbs Also See for 22CX:

Table of Contents

entering Valet Mode and will turn off if you are exiting Valet Mode.

Remote-Controlled Valet

You can also enter or exit Valet Mode by using the remote

transmitter:

1. Open any vehicle door.

2. Press

3. Press

4. Press

again.

The LED system status indicator will light solidly if you have

entered Valet Mode and will turn off if you have exited Valet Mode.

Nuisance Prevention

Circuitry

Your security system has Nuisance Prevention Circuitry

™

(NPC

™

) to

prevent annoying false alarms. This circuitry is designed to prevent

repetitive trigger sequences due to faulty door pinswitches or envi-

ronmental conditions such as thunder, jackhammers, airport

noise, etc.

Here's how it works: If the alarm is triggered by the same sensor

or switch three times within a 60 minute period, your system inter-

prets this pattern of triggers as false alarms. After the third trig-

ger, the NPC

™

ignores, or bypasses, that sensor or switch (along

with any other sensors or switches sharing the same zone) for 60

minutes. If the bypassed sensor is triggered again while it is

already being bypassed, the 60-minute bypass period will start

2004 Directed Electronics, Inc.

Table of Contents

22 cx 980074 series