Stealth Coding Technology - Clifford Ultramax XL2500 Owner's Manual

ZONE
(Number of
DESCRIPTION
LED Flashes)
1
Instant trigger for optional sensor,
hood or trunk pins
2
A heavier impact detected by
the on-board impact sensor
3
Door switch trigger
5
Ignition trigger
NOTE: The LED does not report when the warn-away response has been
activated; it only reports triggered sequences.
Stealth Coding
The receiver and transmitter use mathematical formulas called
algorithms to change their codes each time the transmitter is used.
This Stealth Coding ™
the security of the unit. By following this set code sequence, the
receiver and transmitter stay synchronized, even if the transmitter
is used out of range of the vehicle. If, however, the transmitter is
pressed many times out of range, or the battery is removed, the
transmitter may get temporarily out of sync and fail to operate the
system. To resynchronize the transmitter, simply press
several times within range of the vehicle. The system will auto-
matically resynchronize and the transmitter will respond normally.
2001 Directed Electronics, Inc.
©
Technology
Technology has been developed to increase
DEALER-INSTALLED
OPTIONS
™
13