Table of Contents
Advertisement
QUICK REFERENCE GUIDE
To arm using your remote:
■ Press
on your transmitter for one second. When the system arms,
you will hear a short siren sound, or chirp, and see the parking lights
flash once. If the vehicle's power door locks are controlled by the sys-
tem, the doors will lock.
Disarming:
■ Press
again. You will hear two chirps, and the parking lights will
flash twice. If the power door locks are controlled by the system, the
doors will unlock.
Disarming without a transmitter:
■ Turn on the ignition. Press the Valet switch within 15 seconds. The sys-
tem should now disarm. If it does not disarm, you may have waited too
long to press the Valet switch; turn the ignition off and on and try
again.
Remote-controlled silent arm/disarm:
■ Press
briefly before arming or disarming, and the confirmation
chirp(s) will be eliminated for that one operation only.
Panic Mode:
■ Press
for 1.5 seconds, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for 30 seconds. To stop Panic
Mode at any time, press
To enter or exit Valet Mode with the Valet switch:
■ Turn the ignition to the ON position, then turn to the OFF position.
Press and release the Valet switch within 10 seconds.
Remote-controlled Valet:
■ You can also enter or exit Valet Mode by using the remote transmitter.
First, open any vehicle door. Then press
again. The LED system status indicator will light solidly if you have
entered Valet Mode and will turn off if you have exited Valet Mode.
2004 Directed Electronics, Inc.
©
on the transmitter again.
. Press
. Press
19
Advertisement
Table of Contents
