Panasonic AG-DVC30P Service Manual page 47

8. Removal of Lens Unit
1. Removal of MIC Case Unit.
2. Removal of Side Case R Unit.
3. Removal of POWER C.B.A..
4. Removal of TOP VF Unit.
5. Removal of Front Case Unit.
6. Unscrew the 2 screws (A) and remove the CCD CON STOPPER as shown in figure 8-1.
7. Disconnect the connector P1 and P8 on CAMERA C.B.A. as shown in figure 8-1.
8. Unscrew the 4 screws (B) and remove the Lens Unit.
9. Unscrew the 4 screws (C) and remove the Lens Frame Unit from Lens Unit as shown in figure 8-1.
(Note in installation)
1. In case a new Lens Unit is installed, bend the flexible cable (A) to Z character as shown in figure 8-1.
Bend to Z character
LENS UNIT
SCREW (B)
(A)
SCREW (A)
P8
P1
SCREW (B)
CCD CON STOPPER
Lens Frame Unit
SCREW (C)
Figure 8-1
DIS-7