Technical Specifications - Graco TrueCoat 360 Owner's Manual

Technical Specifications

Technical Specifications
TrueCoat 360
Max Working Pressure
Maximum Amperage
Weight
TrueCoat 360, 360 DS/DSP
TrueCoat 360 VSP
Dimensions:
Length (All models)
Width (All models)
Height 360, 360 DS/DSP
Height 360 VSP
Storage Temperature Range ◆❖
Operating Temperature Range ✓
Storage Humidity Range
Electrical Power Requirement
Duty Cycle
Maximum tip orifice
Wetted materials on all models:
Pump damage will occur if fluid freezes in pump.
◆
Damage to plastic parts may result if impact occurs in low temperature conditions.
❖
Changes in paint viscosity at very low or very high temperatures can affect sprayer
✓
performance.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm –
www.P65warnings.ca.gov.
34
U.S.
2000 psi
2.5 Amps
3.5 lb (18 in.cord)
3.75 lb (18 in.cord)
12.50 in.
5.25 in.
9.75 in.
11.8 in.
32° to 113° F
40° to 90° F
0% to 95% relative
humidity,
non-condensing
120 Vac, 60 Hz, 15A, 1 phase
50%
0.015 in.
stainless steel, brass, polyethylene, carbide, nylon,
polypropylene, fluoroelastomer, acetal, aluminum
Metric
13.8 MPa, 138 bar
2.5 Amps
1.6 kg (45 cm cord)
1.7 kg (45 cm cord)
31.75 cm
13.34 cm
24.77 cm
29.97 cm
0° to 45° C
4° to 32° C
0% to 95% relative humidity,
non-condensing
50%
0.38mm
3A9014A