Graco TrueCoat 360 Owner's Manual page 23

5. To spray cleaning fluid, refill cup
assembly half-full of cleaning fluid and
reattach to sprayer.
a. Turn the Prime Knob forward to
SPRAY position and Spray Tip to
the UNCLOG position.
b. Turn the sprayer upside down and
trigger into a waste pail for 15
seconds.
3A9014A
c. Turn the Spray Tip to the SPRAY
position and trigger into a waste
pail for 15 seconds.
6. Repeat Cleanup steps as needed until
sprayer is clean.
7. Turn Prime Knob down to PRIME
position.
8. Unplug Power Cord.
9. Remove Spray Tip from Spray Tip
Guard.
10. Clean Spray Tip, Spray Tip Guard, and
Pump Filter with warm water and an old
toothbrush. Reinstall Spray Tip and
Pump Filter.
Cleanup
23