Turning The Bulletin Board On/Off; Setting The Number Of Rings (Auto Fax Reception) - Kyocera KM-C830 Operation Manual

Turning the Bulletin Board ON/OFF

If the Bulletin Board function is turned ON, you only need to enter
documents into memory once and they will be available for
transmission to any number of receiving parties upon receipt of their
polling request. To use the Bulletin Board function, it is necessary to
turn it ON in advance. (Refer to "(1) Polling Transmission",
page 4-6.)
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
1. Raise the cover plate and press the Configure key.
Set Fax:
End
Line Type
TTI
2. Use the cursor up or the cursor down key to select "Bulletin Board".
Set Fax:
Password Check Comm.
Fax Forwarding:Off
Bulletin Board:Delete
3. Press the Enter key.
Bulletin Board:
*Del. Doc. after TX
Save Doc. after TX
4. Use the cursor up or the cursor down key to select whether you
want to turn the Bulletin Board function ON or OFF.
* The asterisk ( ) in the message display indicates the current
*
setting.
* If you want to turn the Bulletin Board function ON, select "Save
Doc. after TX". Even after they are transmitted, the documents
will remain in memory waiting for the next polling request.
If you want the documents to be deleted from memory after they
are transmitted, select "Del. Doc. after TX".
Bulletin Board:
*Del. Doc. after TX
Save Doc. after TX
5. Press the Enter key.
The setting for the Bulletin Board function is complete.
Set Fax:
Password Check Comm.
Fax Forwarding:Off
Bulletin Board:Save
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
JUL-08-2001 12:00
:Tone Dial
:Outside P.
P P
P P
Section 6 Various Settings and Registration in this Fax
Setting the Number of Rings
(Auto Fax Reception)
The number of times the fax will "ring" before an incoming call is
answered in the Auto Fax Reception mode can be set here to any
number between 1 - 15.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
1.Raise the cover plate and press the Configure key.
Set Fax:
2. Use the cursor up or the cursor down key to select "# of Rings".
Set Fax:
3. Press the Enter key.
# of Rings:
*2Times
4. Use the cursor up or the cursor down key to select the number of
"rings" before an incoming call is answered.
* The asterisk ( ) in the message display indicates the current
*
setting.
# of Rings:
5. Press the Enter key. The setting for the number of rings in the
Auto Fax Reception mode is complete.
Set Fax:
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
JUL-08-2001 12:00
-
End
Line Type :Tone Dial
TTI :Outside P.
Fax Forwarding:Off
Bulletin Board:Delete
# of Rings : 2Times
1Times
3Times
3Times
4Times
5Times
Fax Forwarding:Off
Bulletin Board:Delete
# of Rings : 5Times
6-3