4
Disassembly/Assembly > Original Exposure/Feed System > Removing the CIS Unit > Procedure
Removing the CIS Unit
■ Preparation
1) Remove the Copyboard Glass.(Refer to page 4-40)
■ Procedure
CAUTION:
• Be sure not to touch the document reading part [A] of the CIS Unit when
disassembling/assembling.
1) Move the CIS Unit [1] to the center.
[1]
4
Disassembly/Assembly > Original Exposure/Feed System > Removing the CIS Unit > Procedure
[A]
F-4-77
F-4-78
2) Remove the CIS Unit [1].
• 1 Harness Retainer [2]
• 1 Flat Cable [3]
• 2 Shafts [4]
[2]
4-47
[1]
[4]
[3]
[1]
F-4-79
4-47