4
Disassembly/Assembly > Original Exposure/Feed System > Removing the Reader Unit > Procedure
3) Open the ADF Unit [1] and remove it.
4
Disassembly/Assembly > Original Exposure/Feed System > Removing the Reader Unit > Procedure
[1]
F-4-70
Removing the Reader Unit
■ Preparation
1) Remove the ADF Unit.(Refer to page 4-43)
2) Remove the Rear Cover.(Refer to page 4-24)
3) Remove the Delivery Outer Cover.(Refer to page 4-29)
4) Remove the Left Cover.(Refer to page 4-27)
5) Remove the Inner Rear Cover.(Refer to page 4-24)
6) Remove the Delivery Inner Cover.(Refer to page 4-29)
7) Remove the Reader Front Cover.(Refer to page 4-33)
8) Remove the Right Front Cover.(Refer to page 4-25)
9) Remove the Support Column Cover.(Refer to page 4-32)
10) Remove the Reader Bottom Cover.(Refer to page 4-36)
11) Remove the Control Panel Unit.(Refer to page 4-36)
■ Procedure
1) Disconnect the connector [1] and the Flat Cable [2], and pull them out to the [A] part at the
lower side of the Reader Rear Cover.
[1]
[2]
x2
4-44
[A]
[2]
[1]
F-4-71
4-44