Service Soft Switch Settings (Printer) - Canon imageRUNNER 1750 Series Service Manual

Item No. Default Setting range
156: 100 0 to 227, one unit
= 0.1 mm
157: 7 0 to 14
158:-164:
165: 0 0 to 3
166: 7 0 to 14
167: -169:
170: 0 0 to
171: -172:
173: 7 0 to 14
174: 0 0 to 1
175:-177:
178: 1 0 to 1
179: 7 0 to 14
180: 7 0 to 14
Item1 Item2 Item3 Default
#PRINT CAS1 CAS1-U1 0 26: OFI, 37: M-OFI, 24: FLSP, 25: A-FLSP, 42: FA4,
CST 34: G-LGL 0: default
CAS1-U2 0 32: G-LTR-R, 23: K-LGL-R, 0: default
CAS1-U3 0 Not used
CAS1-U4 0 28: B-OFI, 0: default
CAS2 CAS2-U1 0 26: OFI, 37: M-OFI, 24: FLSP, 25: A-FLSP, 42: FA4,
34: G-LGL 0: default
CAS2-U2 0 32: G-LTR-R, 23: K-LGL-R, 0: default
CAS2-U3 0 Not used
CAS2-U4 0 28: B-OFI, 0: default
CAS3 CAS3-U1 0 26: OFI, 37: M-OFI, 24: FLSP, 25: A-FLSP, 42: FA4,
34: G-LGL 0: default
CAS3-U2 0 32: G-LTR-R, 23: K-LGL-R, 0: default
CAS3-U3 0 Not used
CAS3-U4 0 28: B-OFI, 0: default
CAS4 CAS4-U1 0 26: OFI, 37: M-OFI, 24: FLSP, 25: A-FLSP, 42: FA4,
34: G-LGL 0: default
CAS4-U2 0 32: G-LTR-R, 23: K-LGL-R, 0: default
CAS4-U3 0 Not used
CAS4-U4 0 28: B-OFI, 0: default
8
Service Mode > Details of Service Mode > #PRINT > Service Soft Switch Settings (PRINTER)
Function
Adjustment of the registration loop volume
(Envelop cassette pickup)
Pickup timing adjustment
Not used
Fixing auto cleaning frequency setting
Temperature adjustment UP/DOWN mode
(Plain paper, manual feed tray)
Not used
Charging frequency setting
Not used
Temperature adjustment UP/DOWN mode
(2nd page of double-sided printing)
Reduction in FCOT
Not used
Setting of fixing auto cleaning
Temperature adjustment UP/DOWN mode
(Envelop/Postcard)
Temperature adjustment UP/DOWN mode
(Special mode N)
T-8-36
Setting range Function
Cassette
1paper size
group special,
standard-size
paper entry
Cassette 2
paper size
group special,
standard-size
paper entry
Cassette 3
paper size
group special,
standard-size
paper entry
Cassette 4
paper size
group special,
standard-size
paper entry
T-8-37
8 Service Mode > Details of Service Mode > #PRINT > Service Soft Switch Settings (PRINTER)

■ Service Soft Switch Settings (PRINTER)

● SSSW-SW13
List of Functions
Bit Function
0 not used
1 Stopping of drive of the Delivery Cooling FAN
2 not used
3 not used
4 not used
5 not used
6 not used
7 not used
Detailed Discussions of Bit 1
When "1" is set, the drive of the Delivery Cooling FAN is stopped.
This stops the airflow to the front of the product, which can reduce the spread of odor to the
front.
Instead, the ability to cool down delivered paper decreases, which causes delivery adhesion
more likely to occur.
Default: 0
● SSSW-SW14
List of Functions
Bit Function
0 Transfer bias pressure reduction mode
1 not used
2 Black belt addition mode
3 Post-rotation reduction mode
4 Flicker reduction mode
5 not used
6 not used
7 not used
Detailed Discussions of Bit 0
Select whether to enable or disable transfer bias pressure reduction mode.
Select "Enable" to avoid image defects (black spots) produced by transfer bias leaks
occurring in a low-pressure region, such as one at a high altitude. This setting regulates the
transfer bias to keep it from exceeding a predetermined level during printing.
Detailed Discussions of Bit 2
Select whether to enable or disable black belt addition mode. If the user uses paper that causes
8-33
1 0
- -
Stopped Not stopped
- -
- -
- -
- -
- -
- -
T-8-38
1 0
Enable Disable
- -
Enable Disable
Enable Disable
Enable Disable
- -
- -
- -
T-8-39
8-33