Removing The Reader Controller Pcb; Preparation; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Original Exposure/Feed System > Removing the Reader Controller PCB > Procedure

Removing the Reader Controller PCB

■ Preparation

1) Remove the ADF Unit.(Refer to page 4-43)
2) Remove the Rear Cover.(Refer to page 4-24)
3) Remove the Delivery Outer Cover.(Refer to page 4-29)
4) Remove the Left Cover.(Refer to page 4-27)
5) Remove the Reader Rear Cover.(Refer to page 4-34)
6) Remove the Copyboard Glass.(Refer to page 4-40)

■ Procedure

1) Remove the Reader Controller PCB [1].
• 1 Harness Retainer [2]
• 3 Connectors [3]
• 2 Flat Cables [4]
• 2 Screws [5]
[5]
x2
[1]
4 Disassembly/Assembly > Original Exposure/Feed System > Removing the Reader Controller PCB > Procedure
[4] [3]
x5
[3]
[4]
[5]
[3]
[2]
F-4-75
CAUTION:
Fit the Reader Controller PCB [1] into the 2 grooves [A] of the plate when assembling.
4-46
[A]
[1]
F-4-76
4-46