Table of Contents
Advertisement
2.
If there is a lot of content in the tile, scroll using
or
.
3.
If required, close the notification using
8.8 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting and the
standby screen.
Note: If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
operate your appliance so that it is Sabbath-compliant,
do not open the appliance door until after operation.
1.
Change the "Lighting" basic setting to "Always off".
→ "Basic settings", Page 28
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
2.
Change the "Standby screen" basic setting to "Off".
→ "Basic settings", Page 28
This means that the display always remains off dur-
ing operation.
9 Rapid heating
To save time, rapid heating
ing time for set temperatures over 100 °C.
Rapid heating is possible for the following types of
heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Intensive heat
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
10 Time-setting options
For an operation, you can set the cooking time and the
time at which the operation should be finished. The
timer runs independently of the operation.
Time-setting
Use
option
Cooking time
If you set a cooking time, the appli-
ance stops heating automatically
once this time has elapsed.
.
can shorten the preheat-
3.
Set the required operating mode.
→ "Setting an operating mode", Page 16
→ "Setting the type of heating and the temperature",
Page 16
4.
Set the required cooking time depending on the op-
erating mode.
→ "Setting the cooking time", Page 18
→ "Time-setting options", Page 17
5.
Use "End time" to set the time at which the opera-
tion should end.
→ "Setting the end time", Page 18
→ "Time-setting options", Page 17
6.
Place the food in the cooking compartment before
the appliance starts to heat.
7.
Start the operation.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
8.
When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Note: If necessary, change the basic setting for the
lighting and the standby screen again.
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
Rapid heating automatically switches off as of a set
temperature of 200 °C.
2.
Press "Rapid heating".
a "On" is in the tile.
3.
Use "Start" to start the operation.
a Rapid heating starts.
a Once rapid heating is complete, a signal tone
sounds. "Off" appears for "Rapid heating"
4.
Place the food in the cooking compartment.
Cancelling rapid heating
▶
Press "Rapid heating".
a For "Rapid heating"
Time-setting
option
End time
Timer
Rapid heating en
"Off" appears on the display.
Use
Along with the cooking time, you can
set the time at which you want the
operation to end. The appliance
starts up automatically so that the
operation finishes at the required
time.
You can set the timer to run inde-
pendently of the appliance during op-
eration. It does not affect the appli-
ance.
.
17
Advertisement
Table of Contents
