Troubleshooting - Siemens HN978GM.1 User Manual And Installation Instructions

Table of Contents

Advertisement

en Rails
26  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
26.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
1.
Lift the rail forwards
2.
Push the entire rail backwards
26.2 Fitting the retainers
The retainers may fall out when you detach the rails.
Note:
The retainers at the front differ from those at the rear.
1.
Hook the front retainers with the hook into the round
hole at the top and set them at a slight angle
27  Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
38
​ ⁠ and detach it
​ ⁠ .
​ ⁠ and take it out
2.
Hook the front retainers in at the bottom and
straighten them
​ ⁠ .
3.
Hook the rear retainers with the hook into the top
hole
​ ⁠ and push them into the bottom hole
26.3 Attaching the rails
1.
Hook the rear shelf support into the retainers at the
top and bottom
2.
Hook in the rail at the front
​ ⁠ .
​ ⁠ .
​ ⁠ and pull it forwards
​ ⁠ .
​ ⁠ and press it down
​ ⁠ .
​ ⁠ .

Advertisement

Table of Contents
loading

Table of Contents