Siemens ARCADIS Avantic SP Start-Up Instructions page 16

16
Fig. 3:
•
Measurement configuration according to
(1/Fig. 3 / p. 16)
•
For safety reasons, place the system on an insulated base.
•
Perform measurement and repeat measurements.
•
Document the measured values in the "Leakage current test protocol",
rent measurement / p.
ARCADIS Avantic
Measuring circuit for the direct measurement of the system leakage current
is not available in ARCADIS Avantic.
39).
SPR2-330.815.01.01.02
02.05
General Startup
(Fig. 2 / p. 15) application part
Page 16 of 46
CS SD 24
(Leakage cur-
Siemens AG
Medical Solutions