Measuring The System Leakage Current; 2001 (Preferred Measuring Method); 1990 (E.g. Bender Tester) - Siemens ARCADIS Avantic SP Start-Up Instructions

General Startup

Measuring the system leakage current

NOTE
Measuring arrangements for system leakage current with tester VDE 0751 Octo-
ber 2001 (preferred measuring method)
Fig. 2:
•
Perform measurement configuration according to
(1/Fig. 2 / p. 15)
•
Perform measurement and repeat measurements.
•
Document the measured values in the "Leakage current test protocol",
rent measurement / p.
Measuring arrangements for system leakage current with tester VDE 0751 Octo-
ber 1990 (e.g. Bender tester)
Siemens AG
Medical Solutions
Perform the system leakage current measurement only if the line
voltage on the ARCADIS Avantic system must be adapted to the lo-
cal line voltage.
See also
measurement / p.
Measuring circuit for measuring the system leakage current according to the differential
current method
is not available in ARCADIS Avantic.
39).
SPR2-330.815.01.01.02
02.05
(Notes on equivalent
10).
(Fig. 2 / p.
Page 15 of 46
CS SD 24
leakage current
15). Application part
(Leakage cur-
ARCADIS Avantic
15
0
0
0