NETGEAR WAX615 User Manual page 201

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
10. Configure the WiFi bridge settings on the access point at the other end of the WiFi
bridge and restart that access point.
Note: If the device at the other end of the WiFi bridge is a NETGEAR access point,
you might not need to restart it.
The WiFi bridge is established.
11. Verify connectivity across the LANs of both access points.
If the configuration is set up correctly, a computer on any WiFi or wired LAN segment
of the access point that functions as the WiFi repeater can connect to the Internet
or share files and printers with any other computer or server connected to the access
point that functions as the WiFi base station.
Note: After the WiFi bridge is established, you cannot change the WiFi channel for the
radio on which the WiFi bridge is established.
Set up a WiFi Bridge 201 User Manual