NETGEAR WAX615 User Manual page 108

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Select Management > Configuration > Security > MAC ACL.
5. Click the group name for the MAC ACL that you want to set up.
The previous figure shows some examples. Devices in the Available Stations table
are automatically detected by the access point and are common to all MAC ACLs,
which allows you to add a device to more than one MAC ACL. A neighboring station
displays as Neighbor and a connected station displays as Connected.
6. To change the group name, enter a new name in the Group Name field.
The default group names for the eight MAC ACLs are Management, Guest, Guest1,
Custom, Custom 1, Custom 2, Custom 3, and Custom 4.
7. Select the ACL Policy Allow or Deny radio button.
Manage Access and Security 108 User Manual