Change The Format Of The Dhcp Offer Messages In A Wifi Network - NETGEAR WAX615 User Manual

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5. Click the > button to the left of the SSID.
The settings for the selected SSID display.
6. Scroll down and click the > Advanced tab.
The page expands.
7. Under URL Tracking, select one of the following radio buttons:
• Enable: URL Tracking is enabled for the WiFi network.
• Disable: URL Tracking is disabled for the WiFi network.
8. Click the Apply button.
Your settings are saved.
Change the format of the DHCP offer
messages in a WiFi network
When a device tries to associate with the WiFi network and negotiates an IP address,
the access point converts the broadcast DHCP offer message that it receives from the
DHCP server to a unicast message, and forwards it to the device. This is the default
configuration. For the DHCP message exchange, unicast packets are more reliable and
minimize the traffic in the network.
If your situation requires that DHCP offer messages must be distributed as broadcast
packets in a specific WiFi network, you can change the message format for that WiFi
network so that the access point does not convert the broadcast DHCP offer messages
to unicast messages.
Manage the Advanced WiFi
Features for a WiFi network
188 User Manual