NETGEAR WAX628 User Manual page 220

Insight Managed WiFi 6 AX5400 Access Point Model WAX628
4. Select Management > Configuration > Wireless > Advanced.
5. Configure the settings as described in the following table.
The descriptions in the table apply to both radios. You can specify the radio settings
for the 2.4 GHz and 5 GHz radios individually, but the check box for the 802.11n 256
QAM feature applies to the 2.4 GHz radio only (the feature is always enabled for the
5 GHz radio). The 802.11h feature applies to the 5 GHz radio only.
Setting
Max. Wireless Clients
RTS Threshold
(256-2346)
Manage the Advanced Radio
Features
Description
Enter the maximum number of WiFi clients that can simultaneously associate with
the radio.
For the 2.4 GHz radio, the range is from 1 to 128 WiFi clients, and the default is 128.
For the 5 GHz radio, the range is from 1 to 200 WiFi clients, and the default is 200.
Enter the Request to Send (RTS) threshold. The range is from 256 to 2346. The default
is 2346.
If the packet size is equal to or less than the RTS threshold, the radio uses the Carrier
Sense Multiple Access with Collision Detection (CSMA/CD) mechanism and the data
frame is transmitted immediately after the silence period. If the packet size is larger
than the RTS threshold, the system uses the CSMA with Collision Avoidance
(CSMA/CA) mechanism. In this situation, the transmitting device sends the RTS packet
to the receiving device and waits for the receiving device to return a Clear to Send
(CTS) packet before sending the actual packet data.
220 User Manual