NETGEAR WAX628 User Manual page 202

Insight Managed WiFi 6 AX5400 Access Point Model WAX628
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 24.
The Dashboard page displays.
4. Select Management > Configuration > Wireless Bridge.
The page that displays lets you select a WDS profile (WDS 1, WDS 2, WDS 3, or WDS
4).
5. Click the > button to the left of a WDS profile.
The WDS profile page displays.
6. Select the Band 2.4 GHz or 5 GHz radio button.
Your selection determines the radio band on which the WDS is established. For
countries that do not support dual-band operation, you cannot select the radio.
7. Select the VAP Enable radio button.
By default, a WDS profile is disabled.
8. Configure the WDS profile settings as described in the following table.
Set up a WiFi Bridge 202 User Manual