Set Bandwidth Rate Limits For A Wifi Network - NETGEAR WAX628 User Manual

Insight Managed WiFi 6 AX5400 Access Point Model WAX628
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 24.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5. Click the > button to the left of the SSID.
The settings for the selected SSID display.
6. Scroll down and click the > Advanced tab.
The page expands.
7. Select the MAC ACL check box.
8. Do one of the following:
• Select the Local MAC ACL radio button, and from the Select Group menu, select
the MAC ACL that you defined earlier.
To change the MAC ACL policy, MAC addresses in the ACL, or both, click the
link next to the group. For more information, see Manage local MAC access
control lists on page 115.
• Select the Radius MAC ACL radio button.
This option functions only if you set up a RADIUS server (see Set up RADIUS
servers on page 128).
9. Click the Apply button.
Your settings are saved.

Set bandwidth rate limits for a WiFi network

You can set rate limits for the upload and download bandwidths for devices that are
connected to a WiFi network. The minimum bandwidth rate is 64 Kbps, the maximum
bandwidth rate is 1024 Mbps. You can set one rate for the upload bandwidth and
another rate for the download bandwidth.
Note: You can set bandwidth rate limits for a maximum of two WiFi networks on the
access point.
Manage the Advanced WiFi
Features for a WiFi network
212 User Manual