Display Client Distribution, Connected Clients, And Client Trends.185 - NETGEAR WAX628 User Manual

Insight Managed WiFi 6 AX5400 Access Point Model WAX628
At the top of the page, for each radio band, the page displays the total number of
unknown access points.
For information about moving unknown access points to the Known AP list, see
Enable neighbor access point detection and move access points to the Known AP
List on page 123.
5. To display the most recent unknown access points, click the Refresh button.
6. To view the Known AP list, click the Known AP tab.
At the top of the page, for each radio band, the page displays the total number of
known access points.
7. To display the most recent known access points, click the Refresh button.
Display client distribution, connected clients,
and client trends
To display the clients that are connected to the access point over WiFi:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 42.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
Monitor the Access Point and the
Network
185 User Manual