Metra Electronics 95-7298B Installation Instructions Manual page 3

5. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure E)
6. Remove (3) Phillips screw securing the
climate control panel. (Figure F)
DASH DISASSEMBLY
(Figure E)
(Figure F)
(CONT.)
7. Remove (1) Phillips screw securing the
lower right side drivers knee bolster.
Unsnap the bolster just enough to
access the (1) Phillips screw securing the
climate control panel, then remove the
screw. (Figure G)
8. Unclip the climate/radio control panel
from the dash, unplug the connectors,
then remove the panel. (Figure H)
Continue to Kit Preparation
(Figure G)
(Figure H)
REV. 9/14/2022 INST95-7298B
3