Konica Minolta Magicolor 7300 User Manual page 105

3
Check the indicator in the window. If the
indicator is red, a paper misfeed occurred
within the printer or the printer has been
turned off while receiving data, printing, or
performing its automatic adjustment.
Remove the misfed paper, close the front
door, and then turn on the printer.
4
Use your left hand to grab the
handle
lever.
Use your right hand to support the
lever.
5
Pull the handle toward you to
release the lever.
6
Pull the left end of the lock lever
toward you to open it to a 45° angle.
Attention
If the lock lever is opened too far,
it may come off its shaft. Be
careful not to drop the lever.
7
Push the right end of the lock lever
toward the printer to remove it from its
shaft
you to remove it
Replacing a Print Unit Assembly
of the print units' lock
, and then pull the lever toward
.
97