Duplexing - Konica Minolta Magicolor 4750DN User Manual

Duplexing

Select paper with high opacity for duplex (double-sided) printing. Opacity
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Note
Only plain paper, special paper and thick stock, 60–210 g/m
bond) can be autoduplexed. See "Media Specifications" on page 6-2.
Duplexing envelopes, letterhead, labels, postcards, glossy media or
single side only papers is not supported.
How do I autoduplex?
Duplex (double-sided) printing can only be performed with the magicolor
4750DN.
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
1
1
1
1 1
6-30
If "Short Edge" is selected, the pages will be laid out to flip
at the top.
1
3
If "Long Edge" is selected, the pages will be laid out to flip
at the side.
1 3
2
(16–55.9 lb
Duplexing