Card Stock - Konica Minolta Magicolor 2480 MF User Manual

Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet media.
Layered
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn
Too slick, too coarse, or too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved

Card Stock

Paper thicker than 90 g/m
card stock to ensure acceptable performance and to ensure that the image
does not shift.
You can print continuously with card stock. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Capacity
Driver
Media Type
Weight
Duplexing
43 lb bond is also referred to as 90 lb index stock.
26
2
(24 lb bond) is referred to as card stock. Test all
Tray 1 Up to 50 sheets, depending on their thick-
ness
Tray 2 Not supported
Cardstock
91 to 163 g/m² (25 to 43 lb bond)
Not supported
Print Media