Power Requirements - Konica Minolta Magicolor 2300 DL User Manual

Power Requirements

WARNING!
Connect the power plug to an outlet with the same rated voltage as the
printer. No other devices should be connected to this outlet, as
overheating could cause fire or electric shock. The printer draws 13 A at
100 V, 11 A at 120 V, or 7 A at 220–240 V. Your printer requires a properly
grounded AC outlet. The grounding terminal on the power cable should
be connected to a good earth ground to prevent electric shock and fire.
" #
In compliance with UL guidelines, "The appliance inlet is considered to
be the main disconnect device."
Input Power
Voltage
Fluctuation
Rate and Rated
Line Voltage
Frequency
Variation Rate
Maximum
Electrical
Current
Noise-
generating
Equipment
Grounding
150
Japan
North America 120 VAC; 50/60 Hz ±3%
Europe
Latin America
Notes: Amperage capacity is at least 1.2 times that used
by the printer.
Japan
North America 120 VAC ±10%
Europe
Latin America
Notes: 10% of the rated line voltage for proper operation.
Within 50–60 ±3 Hz
Required during operation is 8 amps for a 100 V or a 120 V
system and 4 amps for a 220–240 V system.
Should not be connected to the same electrical outlet as
the printer.
Your printer requires a properly grounded AC outlet.
100 VAC; 50/60 Hz ±3%
220–240 VAC; 50/60 Hz ±3%
115/120 VAC; 50/60 Hz ±3%
220–240 VAC; 50/60 Hz ±3%
100 VAC ±10%
220–240 VAC ±10%
120 VAC ±10%
220–240 VAC ±10%
Interface Panel