Envelopes - Konica Minolta Magicolor 2300 DL User Manual

Driver
Mode
Weight
Duplexing
Notes
Do not use thick stock that is
!
Mixed with any other media in the media trays (as this will cause printer
jamming)

Envelopes

Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these
layered regions may be lost or faded.
Capacity
Orientation Face up
Type
Driver
Mode
Weight
Duplexing
Use envelopes that are
!
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
" #
!
Approved for laser printing
!
Dry
!
Printed on the front address side only
Do not use envelopes that have
!
Sticky flaps
!
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for
sealing
14
Thick stock
25–43 lb bond (91–163 g/m²)
Not supported
43 lb (163 g/m²) bond is also referred to as 90 lb index stock.
Tray 1 Up to 50 envelopes, depending on their thickness
Tray 2 Not supported
Check printer.konicaminolta.net/support (click on
Answer Base) for currently approved media. To order
approved media, go to www.q-shop.com.
Envelope
25–43 lb bond (91–163 g/m²)
Not supported
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Media Types