Solving Other Problems - Konica Minolta Magicolor 2300 DL User Manual

Solving Other Problems

Symptom
Printer
power is not
on.
Data was
sent to the
printer, but it
doesn't print.
The control
panel
displays
TONER
LOW much
sooner than
expected
You can't
print a
configuration
page.
Solving Other Problems
Cause
The power cord is not
correctly plugged into
the outlet.
Something is wrong
with the outlet
connected to the
printer.
The power switch is
not correctly turned
on (I position).
The printer is
connected to an
outlet with a voltage
or frequency that
does not match the
printer specifications.
An error message is
displayed in the
message window.
A high-capacity toner
cartridge was loaded,
but the toner size was
set at standard
capacity.
The toner cartridge is
defective.
The media tray is
empty.
The printer's doors
aren't closed
securely.
There is a media jam. Check for a media jam.
Solution
Turn the power switch off (O position),
then remove the power cord from the
outlet and plug it back in.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
Set the power switch to the off (O)
position, then set it back to the on (I)
position.
Use a power source with the
specifications listed in appendix A,
"Technical Specifications."
Handle according to the message
displayed.
In the ENGINE/CHANGE TONER SZ
menu, select the capacity listed on the
toner cartridge label.
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Engine/Replace Toner menu).
Check that the media trays are loaded
with media, in place, and secure.
Make sure the doors are closed
securely. Close all doors gently to
avoid jarring the printer. Make sure the
waste toner bottle in installed correctly.
97