Configuring Eco-Settings; Managing Contacts - Lexmark CS827 User Manual

Setting up and using the home screen applications
Notes:
•
To make sure that the location settings of the bookmark are correct, type the IP address of the host
computer where the bookmark is located.
•
Make sure that the printer has access rights to the folder where the bookmark is located.
4
Apply the changes.
Configuring Eco‑Settings
1
From the home screen, touch Eco‑Settings.
2
Configure the Eco‑Mode settings or schedule a power-saving mode.
3
Apply the changes.

Managing contacts

Adding contacts
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Address Book.
3
From the Contacts section, add a contact.
Note: You can assign the contact to one or more groups.
4
If necessary, specify a login method to allow application access.
5
Apply the changes.
Adding groups
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Address Book.
3
From the Contact Groups section, add a group name.
Note: You can assign one or more contacts to the group.
4
Apply the changes.
18