Configuring Eco-Settings; Using Customer Support; Using Qr Code Generator; Setting Up Device Quotas - Lexmark M3250 User Manual

Setting up and using the home screen applications
Configuring Eco‑Settings
1
From the home screen, touch Eco‑Settings.
2
Configure Eco‑Mode or Schedule Power Modes.
3
Apply the changes.

Using Customer Support

1
From the home screen, touch Customer Support.
2
Print or e‑mail the information.
Note: For information on configuring the application settings, see the Customer Support Administrator's
Guide.

Using QR Code Generator

You may need administrative rights to access the application.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Apps > QR Code Generator > Configure.
3
Do either of the following:
•
Select a default QR code value.
•
Type a QR code value.
4
Apply the changes.

Setting up Device Quotas

You may need administrative rights to access the application.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Apps > Device Quotas > Configure.
3
From the User Accounts section, add or edit a user, and then set the user quota.
4
Apply the changes.
17