Table of Contents
Advertisement
8 Select a zone, enter the minimum and maximum
values, or enter a custom value for the alert.
9 If necessary, turn on the alert.
For event and recurring alerts, a message appears each
time you reach the alert value. For range alerts, a message
appears each time you exceed or drop below the specified
range (minimum and maximum values).
Activity Map Settings
You can customize the appearance of the map data
screen for each activity.
Hold MENU, select Activities & Apps, select an activity,
select the activity settings, and select Map.
Configure Maps: Shows or hides data from installed map
products.
Map Theme: Sets the map to display data optimized
for your activity type. The System option uses the
preferences from the system map settings
Themes,
page 54).
Use Sys. Settings: Enables the device to use the
preferences from the system map settings
Settings,
page 54).
Orientation: Sets the orientation of the map. The North Up
option shows north at the top of the screen. The Track
Up option shows your current direction of travel at the
top of the screen.
User Locations: Shows or hides saved locations on the
map.
Auto Zoom: Automatically selects the zoom level for
optimal use of your map. When disabled, you must
zoom in or out manually.
Lock on Road: Locks the position icon, which represents
your position on the map, onto the nearest road.
Track Log: Shows or hides the track log, or the path you
have traveled, as a colored line on the map.
Track Color: Changes the track log color.
Detail: Sets the amount of detail shown on the map.
Showing more detail may cause the map to redraw
more slowly.
Marine: Sets the map to display data in marine mode
(Marine Map Settings,
Draw Segments: Shows or hides segments, as a colored
line on the map.
Draw Contours: Shows or hides contour lines on the map.
Routing Settings
You can change the routing settings to customize the way
the watch calculates routes for each activity.
NOTE: Not all settings are available for all activity types.
Hold MENU, select Activities & Apps, select an activity,
select the activity settings, and select Routing.
Activity: Sets an activity for routing. The watch calculates
routes optimized for the type of activity you are doing.
Popularity Routing: Calculates routes based on the most
popular runs and rides from Garmin Connect.
48
(Map
(Map
page 54).
Courses: Sets how you navigate courses using the watch.
Use the Follow Course option to navigate a course
exactly as it appears, without recalculating. Use the Use
Map option to navigate a course using routable maps,
and recalculate the route if you stray from the course.
Calculation Method: Sets the calculation method to
minimize the time, distance, or ascent in routes.
Avoidances: Sets the road or transportation types to avoid
in routes.
Type: Sets the behavior of the pointer that appears during
direct routing.
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific distance
automatically. This feature is helpful for comparing your
performance over different parts of an activity (for
example, every 1 mile or 5 kilometers).
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Lap.
6 Select an option:
• Select Auto Lap to turn Auto Lap on or off.
• Select Auto Distance to adjust the distance between
laps.
Each time you complete a lap, a message appears that
displays the time for that lap. The device also beeps or
vibrates if audible tones are turned on
page 55).
Customizing the Lap Alert Message
You can customize one or two data fields that appear in
the lap alert message.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Lap > Lap Alert.
6 Select a data field to change it.
7 Select Preview (optional).
Enabling Auto Pause
You can use the Auto Pause feature to pause the timer
automatically when you stop moving. This feature is
helpful if your activity includes stop lights or other places
where you must stop.
NOTE: History is not recorded while the activity timer is
stopped or paused.
1 Hold MENU.
2 Select Activities & Apps.
(System Settings,
Customizing Your Device
Advertisement
Table of Contents
