Saving Or Navigating To A Location On The Map; Navigating With The Around Me Feature; Changing The Map Theme; Compass - Garmin MARQ AVIATOR Owner's Manual

Saving or Navigating to a Location on the Map

You can select any location on the map. You can save the
location or start navigating to it.
1 From the map, hold MENU.
2 Select Pan/Zoom.
Controls and crosshairs appear on the map.
3 Pan and zoom the map to center the location in the
crosshairs.
4 Hold START to select the point indicated by the
crosshairs.
5 If necessary, select a nearby point of interest.
6 Select an option:
• To download the weather radar image associated
with the selected location, select Show NEXRAD
(Viewing NEXRAD Weather Radar,
• To start navigating to the location, select Go.
• To save the location, select Save Location.
• To view information about the location, select
Review.

Navigating with the Around Me Feature

You can use the around me feature to navigate to nearby
points of interest and waypoints.
NOTE: The map data installed on your watch must include
points of interest to navigate to them.
1 From the map, hold MENU.
2 Select Around Me.
Icons indicating points of interest and waypoints
appear on the map.
3 Press UP or DOWN to highlight a section of the map.
4 Press START.
A list of points of interest and waypoints in the
highlighted map section appear.
5 Select a location.
6 Select an option:
• To download the weather radar image associated
with the selected location, select Show NEXRAD
(Viewing NEXRAD Weather Radar,
• To start navigating to the location, select Go.
• To view the location on the map, select Map.
• To save the location, select Save Location.
• To view information about the location, select
Review.
Navigation

Changing the Map Theme

You can change the map theme to display map
data optimized for your activity type. For example,
high contrast map themes provide better visibility
in challenging environments, and activity-specific map
themes display the most important map data at-a-glance.
1 Start an outdoor activity.
2 Hold MENU.
3 Select the activity settings.
4 Select Map > Map Theme.
5 Select an option.

Compass

The device has a 3-axis compass with automatic
calibration. The compass features and appearance
change depending on your activity, whether GPS is
enabled, and whether you are navigating to a destination.
You can change the compass settings manually
(Compass Settings,
settings quickly, you can press START from the compass
widget.

Setting the Compass Heading

1 From the compass widget, press START.
page 3).
2 Select Lock Heading.
3 Point the top of the watch toward your heading, and

Altimeter and Barometer

The device contains an internal altimeter and barometer.
The device collects elevation and pressure data
continuously, even in low-power mode. The altimeter
displays your approximate elevation based on pressure
changes. The barometer displays environmental pressure
data based on the fixed elevation where the altimeter was
most recently calibrated
You can press START from the altimeter or barometer
widgets to open the altimeter or barometer settings
quickly.
page 3).
page 53). To open the compass
press START.
When you deviate from the heading, the compass
displays the direction from the heading and degree of
deviation.
(Altimeter Settings, page 53).
43