Vision Fitness E4000 Assembly Manual page 7

3
STEP
4
STEP
3
STEP
4
STEP
7
PINK BAG
• Remove the three screws from the
upper cover of the bike frame.
• Slide the upper cover onto the
console mast.
• Attach the included string to the
Sensor Wire and pull the Sensor Wire
up through the console mast. Slide the
tension control wire up through the
console mast.
• Slide the console mast onto the
frame bracket and fix it in place with
two screws (M8 x 41L) and the
5 Allen wrench.
MM
• Install the batteries into the console.
Plug the Sensor Wire into the
Console. Attach the Console with the
included screws.
• Turn the tension knob to Level 15.
Reach inside the mast and connect the
tension control cables. Turn the knob
to Level 1 and mount the knob to the
mast with the screw (M5 x 12L).
• Slide the Upper Cover into place
and secure it to the frame using the
two screws for the front and one
screw for the back of the cover.
(These are the screws you removed in
the first step)
SEAT
• Place the seat on the seat post and
tighten with a 13 wrench.
MM