Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Vision Fitness Manuals
  4. Exercise Bike
  5. E4100
  6. Assembly instructions manual

Vision Fitness E4100 Assembly Instructions Manual

Vision fitness cycle assembly instructions
Hide thumbs Also See for E4100:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual See also: Owner's Manual
E4100

ASSEMBLY INSTRUCTIONS

To avoid possible damage to this Fitness Cycle,
please follow these assembly instructions.
Carefully remove all its parts from the box,
lay them out and review the parts list.
If any parts are missing, please call 1-800-335-4348, Ext 12
Before proceeding, find your Fitness Cycle's serial number,
located on the underside of main frame, and enter here:
______________________________
Refer to this number when calling for service.
A41.2
I T
A L L
S T A R T S
W I T H
A
V I S I O N

Advertisement

loading

Related Manuals for Vision Fitness E4100

Summary of Contents for Vision Fitness E4100

  • Page 1: Assembly Instructions

    E4100 ASSEMBLY INSTRUCTIONS To avoid possible damage to this Fitness Cycle, please follow these assembly instructions. Carefully remove all its parts from the box, lay them out and review the parts list. If any parts are missing, please call 1-800-335-4348, Ext 12 Before proceeding, find your Fitness Cycle’s serial number,...
  • Page 2 E4100 Parts Diagram...
  • Page 3 VISION FITNESS E4100 Parts Description Part # Description Front Wheel Parts Front Foot Wheel Axle Front Transport Wheels #182 Outside Wheel Washers #183 Wheel Attachment Nuts Arm Assembly Parts #116 Right Arm #115 Left Arm Plastic Arm Cam Cover #105...
  • Page 4 Assembly NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt. Step 1 • Rear Foot 1: Secure the Rear Foot Assembly (62) to the Frame by using the four Rear Foot Attachment Bolts (167). Step 2 •...
  • Page 5 Cam Pulley (105). 5: Place a thin layer of grease on the pulley surfaces. Reassemble the parts removed in the above steps onto the Cam Pulley Arm (75). Do not yet tighten the Cam Pulley Locknut (183). E4100 Assembly...
  • Page 6 Assembly 6: Slip the Front Transport Wheel (61) onto the right side of the Front Foot Wheel Axle (60). Secure this wheel with the Outside Wheel Washer (182) and the Wheel Attach Nut (183). This nut should be tightened until the wheel has no side-to-side play, but it can still be easily rotated with your fingers.

  • Page 7: Final Assembly

    Step 7 • Pedals 1: Identify the left and right Pedals (91). Grease the Pedal threads, thread each Pedal into the correct left and right crank arms and tighten. NOTE: It is very important to FULLY TIGHTEN each pedal using a long wrench.
  • Page 8 E4100 CAM PULLEY WHEEL W/SPRING INSTRUCTIONS (SERIAL #1198-CURRENT) CAM ARM SILVER INSIDE CAM PULLEY WHEEL WASHER OUTSIDE CAM PULLEY WHEEL SILVER COMPLETE SIDE VIEW WASHER CAM ARM INSIDE CAM OUTSIDE CAM PULLEY WHEEL PULLEY WHEEL SPRING BLACK WASHER SILVER SILVER...
  • Page 9 621-D East Lake Street P.O. Box 280 Lake Mills, WI 53551 (920) 648-4090...