Assemble Bracket Hardware - Cisco Catalyst IR8140 Heavy Duty Series Hardware Installation Manual

Assemble Bracket Hardware

Assemble Bracket Hardware
Several of the procedures in this section require you to assemble the bracket hardware before installing the
bracket. A bracket hardware set consists of one bolt, one washer, one split lock washer, and one nut.
To assemble the bracket hardware set (see the following figure):
Figure 25: Assemble Bracket Hardware Set
Step 1 Slide the split lock washer (2) on the bolt (1).
Step 2
Slide the regular washer (3) on the bolt (1).
Ensure that the split-lock washer is between the regular washer and the bolt as shown.
The instructions for the procedures in this section refer to the mounting plate features shown in the following figure.
Figure 26: Mounting Bracket Details
Item Description
1 Pivot grooves (4)
2 Quick hang notch
Cisco Catalyst IR8140 Heavy Duty Series Router Hardware Installation Guide
36
Mounting the Router