Cisco Catalyst IR8140 Heavy Duty Series Hardware Installation Manual page 23

Table of Contents

Router Hardware Description and Specifications

Figure 4: CPU Module with Covers Over All Components

Item no

The following figure shows the bottom view of the router.

Item

Alarm port covered by PG13 plug

Note

To remove alarm port plug, use #3 Phillips bit.

Ethernet port covered by PG13 plug

To remove Ethernet port plug, use #3 Phillips bit.

Note

SFP port covered by 3/4 NPT plug

Note

To remove SFP port plug, use 5/8" 6 Pt socket driver.

Reset button and Console port covered by M42 plug

To remove M42 plug, use adjustable wrench that spans to 1 3/8".

Note

Cisco Catalyst IR8140 Heavy Duty Series Router Hardware Installation Guide

Router Hardware Overview: Exterior

Table of Contents