Cisco Catalyst IR8140 Heavy Duty Series Hardware Installation Manual page 32

Package Contents
Table 6: IR8140H Package Contents
Qty
1
1
1
1
Optional Items (Ordered Separately)
1
1
1
1
Cisco Catalyst IR8140 Heavy Duty Series Router Hardware Installation Guide
16
Item
Cisco IR8140H
Console cable
Grounding kit
Mounting Bracket Kit
Pole mount kit
Band strap kit
Strap tool kit
Antenna plug
Description
Router enclosure with the following components installed:
• Power supply (100-240 VAC, 60W output) attached to
the back of the IR8140H. Power supply converts AC
input voltage to 12V DC output voltage for the router
(+/- 10%) and input frequency 60Hz and 50Hz (+/- 5%)
• Up to three plug-in Universal Interface Modules (UIMs)
installed with the two supported module types (slots 1,
2, and 3):
• IRMH-WPAN module
• IRMH-LTE module
• CPU module (reserved super slot 0, bottom of the unit)
• On-board GNSS/GPS receiver with antenna port
• N-type connector for direct mount of outdoor antennas
• Battery Backup Units (BBUs), 0 to 3 depending on
configuration ordered
RJ-45 to DB-9
Grounding lug and two screws.
Includes:
• Mounting bracket
• Required hardware
Includes:
• Mounting plate
• Two clamp brackets
• Required hardware
Two steel straps
BAND-IT strap tool
IR-ANT-PLUG
Unpacking the Router