Hoshizaki ACK-40-A Instruction Manual page 8

2) Part Nos. 14, 15 and 16
Step 3
Unscrew and lift up the pump motor, and remove the hole plug.
Then, refit the pump motor to the original position and tighten
the screw.
Pump Motor Fixing Screw
Bushing
Step 4
Attach the tube with bushing.
Insert the tube with bushing fully into the hole in the pump
motor's plastic casing. If the space is not accessible, loosen
the pump motor fixing screw and move the pump motor before
starting work.
Step 5
Attach the tube with coupling.
Run the tube through the channel at the rear of the unit, then
into the wire retainer at the top of the machine compartment,
and out to the unit front.
Note: Do not crush the tube when running it into the wire
retainer.
Wire Retainer (at machine compartment top)
Coupling
Step 6
Use the three truss head machine screws (No. 9) to
assemble the sheet metal parts (Nos. 14, 15 and 16) as
shown.
5
ENGLISH