Hoshizaki ACK-40-A Instruction Manual page 13

ENGLISH
(b) Chemical feeding
Feed the chemical into the unit.
Display
(c) Washing
Circulate the chemical to wash the water circuit.
Display
* To skip any of the above steps and directly go on to the step (d) below, press the RESET button in the step (a), (b) or (c).
(d) Rinsing
Circulate water to wash away the remaining chemical in the water circuit (4 times).
Display
(e) Circuit washing
Wash the chemical feeding line with water.
Display
(f) Draining
Thoroughly drain the water used for cleaning.
Display
4) When the display returns to "oFF", the trial run is completed.
- Check for water leakage in the unit.
- Check the unit for error stop.
5) Press the ON/OFF button to start the icemaking operation.
10