HP StorageWorks ESL9000 Series Manual page 60

Relocation
3. Secure the library (see Figure 5-2).
a. Place the shipping bag over the library, and secure it into place.
b. Remove the ramp sections from the pallet and slide them into the center
section.
c. Insert the foam block between the bottom of the library and the pallet.
d. Insert and attach the stop blocks underneath the library on the right side.
e. Attach the wooden bar on the right side of the library.
f. Remove the wooden bar on the left side of the library.
g. Repeat steps d and e for the left side of the library.
4. Place the accessory kits into the cutouts on the back crate panel.
5. Place the foam cap over the library.
6. Wrap the cardboard crate around the library and fasten it using the plastic
restraining clips.
7. Place the top onto the crate.
8. Secure the crate with two steel restraining bands.
5–6 ESL9000 Series Tape Library Unpacking and Relocating Guide