HP StorageWorks ESL9000 Series Manual page 38

Tape library unpacking and relocating guide

Table of Contents

Unpacking and Moving the Library

3. Inspect the library for any damage that might have occurred during shipment.

4. Place the two ramp extensions in the slots provided at the edge of the pallet (see

Figure 4-10). The ramp can be set up on either the right side or the left side of the

pallet.

NOTE: The following illustrations show the ramp setup procedure from the right side of the

library.

Figure 4–10: Preparing the ramp

4–12

ESL9000 Series Tape Library Unpacking and Relocating Guide

Table of Contents