HP StorageWorks ESL9000 Series Manual page 45

2. Remove the horizontal carriage restraint as shown in Figure 4-16:
a. Remove the two screws that secure the horizontal carriage restraint to the
horizontal carriage 1.
b. Remove the screw that secures the horizontal carriage restraint to the floor of
the library 4.
c. Remove the horizontal carriage restraint 6.
3
2
1
1 Horizontal carriage restraint screws
2 Extension axis assembly
3
Gripper assembly
4
Horizontal carriage restraint screw
5
Horizontal carriage assembly
6
Horizontal carriage restraint
Figure 4–16: Removing the horizontal carriage restraint
3. Slide the horizontal carriage assembly along the horizontal axis toward the middle
of the library.
ESL9000 Series Tape Library Unpacking and Relocating Guide
4
5
6
Unpacking and Moving the Library
SHR-1913
4–19