Table of Contents
Advertisement
Unpacking and Moving the Library
c. Pivot the gripper restraint 3 until it clears the motors and spring post as
shown in Figure 4-19.
d. Remove the gripper restraint 3 by gently pulling it back toward the vertical
axis.
e. Slide the gripper assembly 1 toward the vertical axis.
1
1
Gripper assembly (fully extended)
2
Extension axis assembly (top view)
3
Gripper restraint
Figure 4–19: Removing the gripper restraint
5. Remove the vertical carriage restraint 4 as shown in Figure 4-20:
WARNING: The vertical carriage assembly is extremely heavy.
a. Rotate the extension axis 2 assembly 90 degrees.
b. Remove the screw that secures the vertical carriage assembly 3 to the vertical
carriage restraint 4.
c. Gently slide the vertical carriage assembly 3 up to eye level.
4–22
2
3
ESL9000 Series Tape Library Unpacking and Relocating Guide
Advertisement
Table of Contents
